Damp Check Dome Modification and Filling Instructions.
Materials needed for the modification:
Damp Check Mesh Dome Top
Scissors with a pointed tip
DC DOME READY TO BE CUT
Step 1 – Insert the pointed end of one blade of the scissors in the mesh opening that is two squares to either side of the solid center button at the top of the dome.
Step 2 - Begin cutting a straight line along the outside edge of these mesh squares. Cutting along a line two squares from center on all four sides of the center button will create an approximately 1 ¼” square hole in the top of the unit.
DC DOME WITH OPENING CUT
DC DOME ALTERED AND BEING FILLED
Step 3 – To fill the modified unit, first completely assemble the dome to lid and attach to the bottom tub. Pour provided pack of chemical or refill chemical directly through the opening you have made in the top of the mesh unit. It is recommended that you do this in a sink just in case you do spill some chemical.
Step 4 – To clean the unit between refills, first empty water from the tub into a sink or toilet. Rinse the unit with warm water, dry and reassemble. Refill as in Step 3.
Check Corporation dba DAMP CHECK, 603 Central FL Pkwy, Suite 107, Orlando, FL 32824 P.O. Box 593545, Orlando, FL 32859-3545 phone: 407-438-6007 fax: 407-438-1661 email: firstname.lastname@example.org or email@example.com